3D model and STL files for a 3D printed MCP disengage cap

The design is based on cheap MTS-102 toggle switches with 24 degrees toggle angle that can be found on Aliexpress and 3 mm thickness of the MCP panel. The pins through the hinges can be M3 screws without head.

Sketchup 3D model of the complete structure mounted in the panel (note that the switches in the model are not the MTS-102, but a switch found in the Sketchup 3D warehouse with same height, diameter and length of handle, but with the toggle angle modified to 24 degrees)

STL file of the cap

STL file of the small part of the hinges that is connected to the MCP panel